Module:Convert/text: Difference between revisions
Jump to navigation
Jump to search
Content added Content deleted
(update from sandbox per Template talk:Convert#Module version 4) |
m (1 revision imported) |
||
(19 intermediate revisions by 4 users not shown) | |||
Line 1: | Line 1: | ||
-- Text used by Module:Convert |
-- Text used by Module:Convert for enwiki. |
||
-- This is a separate module to simplify translation for use on another wiki. |
-- This is a separate module to simplify translation for use on another wiki. |
||
-- See [[:en:Template:Convert/Transwiki guide]] if copying to another wiki. |
-- See [[:en:Template:Convert/Transwiki guide]] if copying to another wiki. |
||
Line 19: | Line 19: | ||
['c'] = { exponent = -2, name = 'centi', }, |
['c'] = { exponent = -2, name = 'centi', }, |
||
['m'] = { exponent = -3, name = 'milli', }, |
['m'] = { exponent = -3, name = 'milli', }, |
||
['μ'] = { exponent = -6, name = 'micro', |
['μ'] = { exponent = -6, name = 'micro', }, -- key = 'GREEK SMALL LETTER MU' (U+03BC) utf-8 CE BC |
||
['µ'] = { exponent = -6, name = 'micro', |
['µ'] = { exponent = -6, name = 'micro', prefix = 'μ' }, -- key = 'MICRO SIGN' (U+00B5) utf-8 C2 B5 |
||
['u'] = { exponent = -6, name = 'micro', prefix = ' |
['u'] = { exponent = -6, name = 'micro', prefix = 'μ' }, -- not an SI prefix, but allow for people typing this |
||
['n'] = { exponent = -9, name = 'nano' , }, |
['n'] = { exponent = -9, name = 'nano' , }, |
||
['p'] = { exponent =-12, name = 'pico' , }, |
['p'] = { exponent =-12, name = 'pico' , }, |
||
Line 34: | Line 34: | ||
{ "US", link = "United States customary units" }, |
{ "US", link = "United States customary units" }, |
||
{ "U.S.", link = "United States customary units" }, |
{ "U.S.", link = "United States customary units" }, |
||
{ "imperial", link = "Imperial |
{ "imperial", link = "Imperial units" }, |
||
{ "imp", link = "Imperial |
{ "imp", link = "Imperial units" }, |
||
} |
} |
||
Line 49: | Line 49: | ||
} |
} |
||
-- One of the following categories is included in the text of each message. |
|||
local all_categories = { |
local all_categories = { |
||
unit = "[[Category:Convert |
unit = "[[Category:Convert errors]]", |
||
option = "[[Category:Convert |
option = "[[Category:Convert errors]]", |
||
warning = '[[Category:Convert invalid options]]', |
|||
tracking = '[[Category:Convert tracking]]', |
|||
} |
} |
||
Line 62: | Line 63: | ||
-- All messages that may be displayed if a problem occurs. |
-- All messages that may be displayed if a problem occurs. |
||
local all_messages = { |
local all_messages = { |
||
-- Message format string |
-- Message format string: $1=title, $2=text, $3=category, $4=anchor. |
||
-- Each displayed message starts with "Convert:" so can easily locate by searching article. |
-- Each displayed message starts with "Convert:" so can easily locate by searching article. |
||
cvt_format = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[<i>[[Help:Convert messages# |
cvt_format = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[<i>[[Help:Convert messages#$4|<span title="Convert: $1">convert: $2</span>]]</i>]</sup>$3<span class="error"></span>', |
||
cvt_format2 = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[[Help:Convert messages#$4|<span title="Convert: $1">$2</span>]]</sup>$3<span class="error"></span>', |
|||
cvt_format_preview = '<strong class="error">Error in convert: $1 [[Help:Convert messages#$4|(help)]]</strong>$3', |
|||
-- Each of following messages is a table: |
-- Each of following messages is a table: |
||
-- { [1] = 'title', -- mouseover title text |
-- { [1] = 'title', -- mouseover title text |
||
Line 73: | Line 76: | ||
-- replace = gsub_table, |
-- replace = gsub_table, |
||
-- } Mouseover title text Link text CatKey Anchor |
-- } Mouseover title text Link text CatKey Anchor |
||
cvt_bad_input = { 'input "$1" must be a number and unit' , 'invalid input' , 'option', 'invalid_input' }, |
|||
cvt_bad_num = { 'Value "$1" must be a number' , 'invalid number' , 'option', 'invalid_number' }, |
|||
cvt_big_prec = { 'Precision "$1" is too large' , 'precision too large' , 'option', 'precision_too_large' }, |
|||
cvt_invalid_num = { 'Number has overflowed' , 'number overflow' , 'option', 'number_overflow' }, |
cvt_invalid_num = { 'Number has overflowed' , 'number overflow' , 'option', 'number_overflow' }, |
||
cvt_no_num = { 'Needs the number to be converted' , 'needs a number' , 'option', 'needs_number' }, |
cvt_no_num = { 'Needs the number to be converted' , 'needs a number' , 'option', 'needs_number' }, |
||
cvt_no_num2 = { 'Needs another number for a range' , 'needs another number', 'option', 'needs_another_number' }, |
cvt_no_num2 = { 'Needs another number for a range' , 'needs another number', 'option', 'needs_another_number' }, |
||
cvt_bad_frac = { ' |
cvt_bad_frac = { '"$1" needs an integer above 1' , 'invalid fraction' , 'option', 'invalid_fraction' }, |
||
cvt_bad_prec = { 'Precision " |
cvt_bad_prec = { 'Precision "$1" must be an integer' , 'invalid precision' , 'option', 'invalid_precision' }, |
||
cvt_bad_sigfig = { ' |
cvt_bad_sigfig = { '"$1" needs a positive integer' , 'invalid sigfig' , 'option', 'invalid_sigfig' }, |
||
cvt_empty_option = { 'Ignored empty option " |
cvt_empty_option = { 'Ignored empty option "$1"' , 'empty option' , 'option', 'empty_option' }, |
||
cvt_deprecated = { 'Option "$1" is deprecated' , '*' , 'option', 'deprecated_option', format = 'cvt_format2', nowarn = true }, |
|||
cvt_no_spell = { 'Spelling is not available' , 'bug, ask for help' , 'option', 'ask_for_help' }, |
cvt_no_spell = { 'Spelling is not available' , 'bug, ask for help' , 'option', 'ask_for_help' }, |
||
cvt_unknown_option = { 'Ignored invalid option " |
cvt_unknown_option = { 'Ignored invalid option "$1"' , 'invalid option' , 'option', 'invalid_option' }, |
||
cvt_wd_fail = { 'Unable to access Wikidata' , 'wikidata problem' , 'option', 'wikidata_problem' }, |
|||
cvt_bad_default = { 'Unit "$1" has an invalid default' , 'bug, ask for help' , 'unit' , 'ask_for_help' }, |
|||
cvt_bad_unit = { 'Unit "$1" is invalid here' , 'unit invalid here' , 'unit' , 'unit_invalid_here' }, |
|||
cvt_no_default = { 'Unit "$1" has no default output unit' , 'bug, ask for help' , 'unit' , 'ask_for_help' }, |
|||
cvt_no_unit = { 'Needs name of unit' , 'needs unit name' , 'unit' , 'needs_unit_name' }, |
cvt_no_unit = { 'Needs name of unit' , 'needs unit name' , 'unit' , 'needs_unit_name' }, |
||
cvt_unknown = { 'Unit name " |
cvt_unknown = { 'Unit name "$1" is not known' , 'unknown unit' , 'unit' , 'unknown_unit' }, |
||
cvt_should_be = { ' |
cvt_should_be = { '$1' , 'ambiguous unit' , 'unit' , 'ambiguous_unit', regex = unitcode_regex, replace = unitcode_replace }, |
||
cvt_mismatch = { 'Cannot convert " |
cvt_mismatch = { 'Cannot convert "$1" to "$2"' , 'unit mismatch' , 'unit' , 'unit_mismatch' }, |
||
cvt_bug_convert = { 'Bug: Cannot convert between specified units', 'bug, ask for help' , 'unit' , 'ask_for_help' }, |
cvt_bug_convert = { 'Bug: Cannot convert between specified units', 'bug, ask for help' , 'unit' , 'ask_for_help' }, |
||
cvt_lookup = { 'Unit " |
cvt_lookup = { 'Unit "$1" is incorrectly defined' , 'bug, ask for help' , 'unit' , 'ask_for_help' }, |
||
} |
} |
||
-- Text to join input value/unit with output value/unit. |
-- Text to join input value/unit with output value/unit. |
||
local disp_joins = { |
local disp_joins = { |
||
-- |
-- [1]=before output, [2]=after output, [3]=between outputs in a combination; default "; " |
||
-- [wantname] gives default abbr=off |
|||
["or"] = { " or " , "" , |
["or"] = { " or " , "" , " or ", wantname = true }, |
||
["sqbr-sp"] = { " [" , "]" }, |
["sqbr-sp"] = { " [" , "]" }, |
||
["sqbr-nbsp"] = { " [" , "]" }, |
["sqbr-nbsp"] = { " [" , "]" }, |
||
["comma"] = { ", " , "" }, |
["comma"] = { ", " , "" , ", " }, |
||
["slash-sp"] = { " / " , "" }, |
["slash-sp"] = { " / " , "" , wantname = true }, |
||
["slash-nbsp"] = { " / ", "" }, |
["slash-nbsp"] = { " / ", "" , wantname = true }, |
||
["slash-nosp"] = { "/" , "" }, |
["slash-nosp"] = { "/" , "" , wantname = true }, |
||
["b"] = { " (" , ")" }, |
["b"] = { " (" , ")" }, |
||
["(or)"] = { " (" , ")", |
["(or)"] = { " (" , ")", " or " }, |
||
["br"] = { "<br/>" |
["br"] = { "<br />" , "" , wantname = true }, |
||
["br()"] = { "<br />(" , ")", wantname = true }, |
|||
} |
} |
||
-- Text to separate values in a range. |
-- Text to separate values in a range. |
||
local range_types = { |
local range_types = { |
||
-- Specifying a table requires |
-- Specifying a table requires either: |
||
-- * "off" and "on" values (for "abbr=off" and "abbr=on"), or |
|||
-- * "input" and "output" values (for LHS and RHS); |
|||
-- other fields are optional. |
-- other fields are optional. |
||
-- When "adj=on|abbr=off" applies, spaces in range text are replaced with hyphens. |
-- When "adj=on|abbr=off" applies, spaces in range text are replaced with hyphens. |
||
Line 125: | Line 135: | ||
["to about"] = " to about ", |
["to about"] = " to about ", |
||
["and"] = { off = " and ", on = " and ", exception = true }, |
["and"] = { off = " and ", on = " and ", exception = true }, |
||
["and(-)"] = { |
["and(-)"] = { input = " and ", output = "–" }, |
||
["or"] = { off = " or " , on = " or " , exception = true }, |
["or"] = { off = " or " , on = " or " , exception = true }, |
||
["to"] = { off = " to " , on = " to " , exception = true }, |
["to"] = { off = " to " , on = " to " , exception = true }, |
||
["to(-)"] = { |
["to(-)"] = { input = " to ", output = "–" }, |
||
["+/-"] = { off = " ± ", on = " ± ", adj = " ± ", is_range_change = true }, |
["+/-"] = { off = " ± ", on = " ± ", adj = " ± ", is_range_change = true }, |
||
["x"] |
["by(x)"] = { input = " by ", output = " × ", out_range_x = true }, |
||
["x"] = { off = " by ", on = " × ", abbr_range_x = true }, |
|||
["xx"] = " × ", |
["xx"] = " × ", |
||
⚫ | |||
["*"] = "×", -- use "*" to replace "x" in {{convert/2}} which is different from "x" in old {{convert}} |
|||
["/"] = " / ", -- for a table of high/low temperatures with {{convert|83|/|63|F|disp=br()|abbr=values}} |
|||
} |
} |
||
local range_aliases = { |
local range_aliases = { |
||
-- ["alternative name for a range"] = "standard range name" |
-- ["alternative name for a range"] = "standard range name" |
||
⚫ | |||
["–"] = "-", |
["–"] = "-", |
||
["–"] = "-", |
["–"] = "-", |
||
⚫ | |||
["×"] = "x", |
["×"] = "x", |
||
["×"] = "x", |
["×"] = "x", |
||
Line 147: | Line 157: | ||
} |
} |
||
-- |
-- Convert accepts range text delimited with whitespace, for example, {{convert|1 to 2|ft}}. |
||
-- |
-- In addition, the following "words" are accepted without spaces, for example, {{convert|1-2|ft}}. |
||
-- Words must be in correct order for searching, for example, 'x' after 'xx'. |
|||
-- Put '-' last so can have a simple range with negative values as in {{convert|-5 to -1|C}}. |
|||
local range_words = { ' |
local range_words = { '-', '–', 'xx', 'x', '*' } |
||
local ranges = { |
local ranges = { |
||
Line 161: | Line 171: | ||
local en_option_name = { |
local en_option_name = { |
||
-- ["local text for option name"] = "en name used in this module" |
-- ["local text for option name"] = "en name used in this module" |
||
⚫ | |||
["abbr"] = "abbr", |
["abbr"] = "abbr", |
||
["adj"] = "adj", |
["adj"] = "adj", |
||
Line 167: | Line 178: | ||
["disp"] = "disp", |
["disp"] = "disp", |
||
["frac"] = "frac", |
["frac"] = "frac", |
||
⚫ | |||
["lang"] = "lang", |
["lang"] = "lang", |
||
["lk"] = "lk", |
["lk"] = "lk", |
||
⚫ | |||
["order"] = "order", |
["order"] = "order", |
||
⚫ | |||
["qual"] = "qual", |
|||
["qualifier"] = "qual", |
|||
["round"] = "round", |
["round"] = "round", |
||
["sigfig"] = "sigfig", |
["sigfig"] = "sigfig", |
||
Line 177: | Line 191: | ||
["sp"] = "sp", |
["sp"] = "sp", |
||
["spell"] = "spell", |
["spell"] = "spell", |
||
["stylein"] = "stylein", |
|||
["styleout"] = "styleout", |
|||
["tracking"] = "tracking", |
|||
} |
} |
||
Line 182: | Line 199: | ||
-- Convention: parms.opt_xxx refers to an option that is set here |
-- Convention: parms.opt_xxx refers to an option that is set here |
||
-- (not intended to be set by the template which invokes this module). |
-- (not intended to be set by the template which invokes this module). |
||
-- Example: At |
-- Example: At enwiki, "abbr" includes: |
||
-- ["comma"] = "opt_nocomma" |
-- ["comma"] = "opt_nocomma" |
||
-- As a result, if the template uses abbr=comma, |
-- As a result, if the template uses abbr=comma, Module:Convert sets: |
||
-- parms["opt_nocomma"] = true |
-- parms["opt_nocomma"] = true |
||
-- parms["abbr"] = nil |
-- parms["abbr"] = nil |
||
-- Therefore parms.abbr will be nil, or will have one of the listed values |
-- Therefore parms.abbr will be nil, or will have one of the listed values |
||
-- that do not start with "opt_". |
-- that do not start with "opt_". |
||
-- An option value of form "xxx?" is the same as "xxx" but shows the input as deprecated. |
|||
local en_option_value = { |
local en_option_value = { |
||
-- $=x is handled as a special case: x should be a currency symbol that will be used instead of "$" |
|||
["abbr"] = { |
["abbr"] = { |
||
-- ["local text for option value"] = "en value used in this module" |
-- ["local text for option value"] = "en value used in this module" |
||
⚫ | |||
["def"] = "", -- ignored (some wrapper templates call convert with "abbr=def" to mean "default abbreviation") |
["def"] = "", -- ignored (some wrapper templates call convert with "abbr=def" to mean "default abbreviation") |
||
["h"] = "on", -- abbr=on + use "h" for hand unit (default) |
["h"] = "on", -- abbr=on + use "h" for hand unit (default) |
||
["hh"] = "opt_hand_hh", -- abbr=on + use "hh" for hand unit |
["hh"] = "opt_hand_hh", -- abbr=on + use "hh" for hand unit |
||
["in"] = "in", -- use symbol for LHS unit |
["in"] = "in", -- use symbol for LHS unit |
||
["mos"] = "mos", -- in a range, repeat the input unit (no longer used) |
|||
["none"] = "off", -- old name for "off" |
["none"] = "off", -- old name for "off" |
||
["off"] = "off", -- use name for all units |
["off"] = "off", -- use name for all units |
||
["on"] = "on", -- use symbol for all units |
["on"] = "on", -- use symbol for all units |
||
["out"] = "out", -- use symbol for RHS unit (default) |
["out"] = "out", -- use symbol for RHS unit (default) |
||
["unit"] = "unit", -- abbr=on but abbreviate units only: e6km → million km (not ×10⁶ km) |
|||
["values"] = "opt_values", -- show only input and output numbers, not units |
["values"] = "opt_values", -- show only input and output numbers, not units |
||
["~"] = "opt_also_symbol", -- show input unit symbol as well as name |
["~"] = "opt_also_symbol", -- show input unit symbol as well as name |
||
}, |
}, |
||
["adj"] = { |
["adj"] = { |
||
["1"] = "opt_singular", -- unit name is singular when value satisfies: (-1 <= v and v < 0) or (0 < v and v <= 1) |
|||
["flip"] = "opt_flip", -- reverse order of input/output |
|||
["j"] = "opt_use_nbsp", -- "join": use " " instead of " " between value and unit name |
|||
["mid"] = "opt_adjectival, opt_adj_mid", -- adj=on with user-specified text after input unit (between input and output) |
["mid"] = "opt_adjectival, opt_adj_mid", -- adj=on with user-specified text after input unit (between input and output) |
||
["nocomma"] = "opt_nocomma", -- no numsep in input or output numbers |
|||
["off"] = "", -- ignored (off is the default) |
["off"] = "", -- ignored (off is the default) |
||
["on"] = "opt_adjectival", -- unit name is singular and hyphenated |
["on"] = "opt_adjectival", -- unit name is singular and hyphenated |
||
["pre"] = "opt_one_preunit", -- user-specified text before input unit |
["pre"] = "opt_one_preunit", -- user-specified text before input unit |
||
["ri0"] = " |
["ri0"] = "opt_ri=0", -- round input with precision = 0 |
||
["ri1"] = " |
["ri1"] = "opt_ri=1", -- round input with precision = 1 |
||
["ri2"] = " |
["ri2"] = "opt_ri=2", -- round input with precision = 2 |
||
["ri3"] = " |
["ri3"] = "opt_ri=3", -- round input with precision = 3 |
||
}, |
}, |
||
["comma"] = { |
["comma"] = { |
||
["5"] = "opt_comma5", -- only use numsep grouping if 5 or more digits |
["5"] = "opt_comma5", -- only use numsep grouping if 5 or more digits |
||
["gaps"] = "opt_gaps", -- use gaps, not numsep, to separate groups of digits |
["gaps"] = "opt_gaps", -- use gaps, not numsep, to separate groups of digits |
||
[" |
["gaps3"] = "opt_gaps, opt_gaps3", -- group only in threes rather than default of no gap before a single digit after decimal mark |
||
⚫ | |||
}, |
}, |
||
["debug"] = { |
["debug"] = { |
||
Line 228: | Line 243: | ||
}, |
}, |
||
["disp"] = { |
["disp"] = { |
||
[" |
["5"] = "opt_round=5?", -- round output value to nearest 5 |
||
["2"] = "opt_output_only", -- display only output value and symbol/name (not input) |
|||
⚫ | |||
["b"] = "b", -- join: '(...)' |
["b"] = "b", -- join: '(...)' |
||
["(or)"] = "(or)", -- join: '(...)' with 'or' between outputs in a combination |
["(or)"] = "(or)", -- join: '(...)' with 'or' between outputs in a combination |
||
["br"] = "br", -- join: '<br/>' |
["br"] = "br", -- join: '<br />' |
||
⚫ | |||
["comma"] = "comma", -- join: ',' |
["comma"] = "comma", -- join: ',' |
||
["flip"] = "opt_flip", -- reverse order of input/output |
["flip"] = "opt_flip", -- reverse order of input/output |
||
["flip5"] = "opt_flip, opt_round5", -- disp=flip + disp=5 |
|||
["nocomma"] = "opt_nocomma", -- no numsep in input or output numbers |
|||
["number"] = "opt_output_number_only", -- display output value (not input, and not output symbol/name) |
["number"] = "opt_output_number_only", -- display output value (not input, and not output symbol/name) |
||
["or"] = "or", -- join: 'or' |
["or"] = "or", -- join: 'or' |
||
Line 244: | Line 256: | ||
["output only"] = "opt_output_only", |
["output only"] = "opt_output_only", |
||
["preunit"] = "opt_two_preunits", -- user-specified text before input and output units |
["preunit"] = "opt_two_preunits", -- user-specified text before input and output units |
||
⚫ | |||
["slash"] = "slash", -- join: '/' |
|||
["sqbr"] = "sqbr", -- join: '[...]' |
["sqbr"] = "sqbr", -- join: '[...]' |
||
["table"] = "opt_table", -- output is suitable for a table cell with align="right" |
["table"] = "opt_table", -- output is suitable for a table cell with align="right" |
||
["tablecen"] = "opt_tablecen", -- output is suitable for a table cell with align="center" |
["tablecen"] = "opt_tablecen", -- output is suitable for a table cell with align="center" |
||
["u2"] = "opt_output_unit_only", -- display output symbol/name (not input, and not output value) |
|||
["unit"] = "opt_input_unit_only", -- display input symbol/name (not output, and not input value) |
["unit"] = "opt_input_unit_only", -- display input symbol/name (not output, and not input value) |
||
["unit or text"] = "opt_input_unit_only, opt_ignore_error", -- display input symbol/name, or given unit code if not known |
["unit or text"] = "opt_input_unit_only, opt_ignore_error", -- display input symbol/name, or given unit code if not known |
||
Line 256: | Line 265: | ||
}, |
}, |
||
-- frac=x is handled as a special case: x must be an integer (possibly in local language) = 2 or more |
-- frac=x is handled as a special case: x must be an integer (possibly in local language) = 2 or more |
||
-- input=x is handled as a special case: x should be <value><space><unitcode> or <wikidata-property-id> |
|||
["lang"] = { |
["lang"] = { -- language for output digits (both en and local digits are always accepted for input) |
||
["en"] = "opt_lang_en", -- use en digits for numbers, regardless of local language |
["en"] = "opt_lang_en", -- use en digits for numbers, regardless of local language |
||
["local"] = "opt_lang_local", -- use local digits for numbers (default, although config can change default to en) |
["local"] = "opt_lang_local", -- use local digits for numbers (default, although config can change default to en) |
||
Line 265: | Line 275: | ||
["on"] = "on", -- link all unit names or symbols (but not twice for the same unit) |
["on"] = "on", -- link all unit names or symbols (but not twice for the same unit) |
||
["out"] = "out", -- link RHS unit name or symbol |
["out"] = "out", -- link RHS unit name or symbol |
||
}, |
|||
⚫ | |||
⚫ | |||
}, |
}, |
||
["order"] = { |
["order"] = { |
||
["flip"] = "opt_flip", -- reverse order of input/output |
["flip"] = "opt_flip", -- reverse order of input/output |
||
["out"] = "opt_order_out", -- do not show input; instead, use order in output combination, with the first output shown as the input |
|||
}, |
}, |
||
-- qid=x is handled as a special case: x should be a Wikidata Q item identifier. |
|||
-- qual=x is handled as a special case: x should be a Wikidata Q item identifier. |
|||
["round"] = { |
["round"] = { |
||
["5"] = " |
["0.5"] = "opt_round=0.5", -- round output value to nearest 0.5 |
||
[" |
["5"] = "opt_round=5", -- round output value to nearest 5 |
||
["10"] = "opt_round=10", -- round output value to nearest 10 (same as but clearer than "|-1") |
|||
⚫ | |||
⚫ | |||
["each"] = "opt_round_each", -- using default precision in a range, round each output separately (default uses highest precision of each item in range) |
["each"] = "opt_round_each", -- using default precision in a range, round each output separately (default uses highest precision of each item in range) |
||
}, |
}, |
||
Line 280: | Line 293: | ||
["sortable"] = { |
["sortable"] = { |
||
["off"] = "", -- ignored (off is the default) |
["off"] = "", -- ignored (off is the default) |
||
[" |
["on"] = "opt_sortable_on", -- output sort key for use in a sortable table, based on value from converting to a standard base unit |
||
["on"] = "opt_sortable_in", -- same |
|||
["out"] = "opt_sortable_out", -- same, based on output |
|||
}, |
}, |
||
["sp"] = { |
["sp"] = { |
||
Line 293: | Line 304: | ||
["On"] = "opt_spell_in, opt_spell_out, opt_spell_upper", -- same, with first letter of first word in result uppercase |
["On"] = "opt_spell_in, opt_spell_out, opt_spell_upper", -- same, with first letter of first word in result uppercase |
||
}, |
}, |
||
-- stylein=x is handled as a special case: x can be any text |
|||
-- styleout=x is handled as a special case: x can be any text |
|||
-- tracking=x is handled as a special case: x can be any text |
|||
} |
} |
||
Line 299: | Line 313: | ||
all_categories = all_categories, |
all_categories = all_categories, |
||
all_messages = all_messages, |
all_messages = all_messages, |
||
currency = { ['$'] = true, ['£'] = true }, |
currency = { ['$'] = true, ['£'] = true, ['€'] = true, ['₱'] = true, ['₽'] = true, ['¥'] = true }, |
||
customary_units = customary_units, |
customary_units = customary_units, |
||
disp_joins = disp_joins, |
disp_joins = disp_joins, |
Latest revision as of 08:21, 10 October 2019
Documentation for this module may be created at Module:Convert/text/doc
-- Text used by Module:Convert for enwiki.
-- This is a separate module to simplify translation for use on another wiki.
-- See [[:en:Template:Convert/Transwiki guide]] if copying to another wiki.
-- Some units accept an SI prefix before the unit code, such as "kg" for kilogram.
local SIprefixes = {
-- The prefix field is what the prefix should be, if different from the prefix used.
['Y'] = { exponent = 24, name = 'yotta', },
['Z'] = { exponent = 21, name = 'zetta', },
['E'] = { exponent = 18, name = 'exa' , },
['P'] = { exponent = 15, name = 'peta' , },
['T'] = { exponent = 12, name = 'tera' , },
['G'] = { exponent = 9, name = 'giga' , },
['M'] = { exponent = 6, name = 'mega' , },
['k'] = { exponent = 3, name = 'kilo' , },
['h'] = { exponent = 2, name = 'hecto', },
['da']= { exponent = 1, name = 'deca' , name_us = 'deka' },
['d'] = { exponent = -1, name = 'deci' , },
['c'] = { exponent = -2, name = 'centi', },
['m'] = { exponent = -3, name = 'milli', },
['μ'] = { exponent = -6, name = 'micro', }, -- key = 'GREEK SMALL LETTER MU' (U+03BC) utf-8 CE BC
['µ'] = { exponent = -6, name = 'micro', prefix = 'μ' }, -- key = 'MICRO SIGN' (U+00B5) utf-8 C2 B5
['u'] = { exponent = -6, name = 'micro', prefix = 'μ' }, -- not an SI prefix, but allow for people typing this
['n'] = { exponent = -9, name = 'nano' , },
['p'] = { exponent =-12, name = 'pico' , },
['f'] = { exponent =-15, name = 'femto', },
['a'] = { exponent =-18, name = 'atto' , },
['z'] = { exponent =-21, name = 'zepto', },
['y'] = { exponent =-24, name = 'yocto', },
}
-- Some units can be qualified with one of the following prefixes, when linked.
local customary_units = {
{ "US", link = "United States customary units" },
{ "U.S.", link = "United States customary units" },
{ "imperial", link = "Imperial units" },
{ "imp", link = "Imperial units" },
}
-- Names when using engineering notation (a prefix of "eN" where N is a number; example "e6km").
-- key = { "name", link = "article title", exponent = numeric_key_value }
-- If lk=on and link is defined, the name of the number will appear as a link.
local eng_scales = {
["3"] = { "thousand", exponent = 3 },
["6"] = { "million", exponent = 6 },
["9"] = { "billion", link = "1000000000 (number)", exponent = 9 },
["12"] = { "trillion", link = "1000000000000 (number)", exponent = 12 },
["15"] = { "quadrillion", link = "1000000000000000 (number)", exponent = 15 },
}
local all_categories = {
unit = "[[Category:Convert errors]]",
option = "[[Category:Convert errors]]",
warning = '[[Category:Convert invalid options]]',
tracking = '[[Category:Convert tracking]]',
}
-- For some error messages, the following puts the wanted style around
-- each unit code marked like '...%{ft%}...'.
local unitcode_regex = '%%([{}])'
local unitcode_replace = { ['{'] = '"', ['}'] = '"' } -- no longer need the more elaborate substitute used before 2013-09-28
-- All messages that may be displayed if a problem occurs.
local all_messages = {
-- Message format string: $1=title, $2=text, $3=category, $4=anchor.
-- Each displayed message starts with "Convert:" so can easily locate by searching article.
cvt_format = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[<i>[[Help:Convert messages#$4|<span title="Convert: $1">convert: $2</span>]]</i>]</sup>$3<span class="error"></span>',
cvt_format2 = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[[Help:Convert messages#$4|<span title="Convert: $1">$2</span>]]</sup>$3<span class="error"></span>',
cvt_format_preview = '<strong class="error">Error in convert: $1 [[Help:Convert messages#$4|(help)]]</strong>$3',
-- Each of following messages is a table:
-- { [1] = 'title', -- mouseover title text
-- [2] = 'text', -- link text displayed in article
-- [3] = 'category key', -- key to lookup category in all_categories
-- [4] = 'anchor', -- anchor for link to relevant section on help page
-- regex = gsub_regex,
-- replace = gsub_table,
-- } Mouseover title text Link text CatKey Anchor
cvt_bad_input = { 'input "$1" must be a number and unit' , 'invalid input' , 'option', 'invalid_input' },
cvt_bad_num = { 'Value "$1" must be a number' , 'invalid number' , 'option', 'invalid_number' },
cvt_big_prec = { 'Precision "$1" is too large' , 'precision too large' , 'option', 'precision_too_large' },
cvt_invalid_num = { 'Number has overflowed' , 'number overflow' , 'option', 'number_overflow' },
cvt_no_num = { 'Needs the number to be converted' , 'needs a number' , 'option', 'needs_number' },
cvt_no_num2 = { 'Needs another number for a range' , 'needs another number', 'option', 'needs_another_number' },
cvt_bad_frac = { '"$1" needs an integer above 1' , 'invalid fraction' , 'option', 'invalid_fraction' },
cvt_bad_prec = { 'Precision "$1" must be an integer' , 'invalid precision' , 'option', 'invalid_precision' },
cvt_bad_sigfig = { '"$1" needs a positive integer' , 'invalid sigfig' , 'option', 'invalid_sigfig' },
cvt_empty_option = { 'Ignored empty option "$1"' , 'empty option' , 'option', 'empty_option' },
cvt_deprecated = { 'Option "$1" is deprecated' , '*' , 'option', 'deprecated_option', format = 'cvt_format2', nowarn = true },
cvt_no_spell = { 'Spelling is not available' , 'bug, ask for help' , 'option', 'ask_for_help' },
cvt_unknown_option = { 'Ignored invalid option "$1"' , 'invalid option' , 'option', 'invalid_option' },
cvt_wd_fail = { 'Unable to access Wikidata' , 'wikidata problem' , 'option', 'wikidata_problem' },
cvt_bad_default = { 'Unit "$1" has an invalid default' , 'bug, ask for help' , 'unit' , 'ask_for_help' },
cvt_bad_unit = { 'Unit "$1" is invalid here' , 'unit invalid here' , 'unit' , 'unit_invalid_here' },
cvt_no_default = { 'Unit "$1" has no default output unit' , 'bug, ask for help' , 'unit' , 'ask_for_help' },
cvt_no_unit = { 'Needs name of unit' , 'needs unit name' , 'unit' , 'needs_unit_name' },
cvt_unknown = { 'Unit name "$1" is not known' , 'unknown unit' , 'unit' , 'unknown_unit' },
cvt_should_be = { '$1' , 'ambiguous unit' , 'unit' , 'ambiguous_unit', regex = unitcode_regex, replace = unitcode_replace },
cvt_mismatch = { 'Cannot convert "$1" to "$2"' , 'unit mismatch' , 'unit' , 'unit_mismatch' },
cvt_bug_convert = { 'Bug: Cannot convert between specified units', 'bug, ask for help' , 'unit' , 'ask_for_help' },
cvt_lookup = { 'Unit "$1" is incorrectly defined' , 'bug, ask for help' , 'unit' , 'ask_for_help' },
}
-- Text to join input value/unit with output value/unit.
local disp_joins = {
-- [1]=before output, [2]=after output, [3]=between outputs in a combination; default "; "
-- [wantname] gives default abbr=off
["or"] = { " or " , "" , " or ", wantname = true },
["sqbr-sp"] = { " [" , "]" },
["sqbr-nbsp"] = { " [" , "]" },
["comma"] = { ", " , "" , ", " },
["slash-sp"] = { " / " , "" , wantname = true },
["slash-nbsp"] = { " / ", "" , wantname = true },
["slash-nosp"] = { "/" , "" , wantname = true },
["b"] = { " (" , ")" },
["(or)"] = { " (" , ")", " or " },
["br"] = { "<br />" , "" , wantname = true },
["br()"] = { "<br />(" , ")", wantname = true },
}
-- Text to separate values in a range.
local range_types = {
-- Specifying a table requires either:
-- * "off" and "on" values (for "abbr=off" and "abbr=on"), or
-- * "input" and "output" values (for LHS and RHS);
-- other fields are optional.
-- When "adj=on|abbr=off" applies, spaces in range text are replaced with hyphens.
-- With "exception = true", that also occurs with "adj=on|abbr=on".
-- If "adj" is defined here, that text (unchanged) is used with "adj=on".
["+"] = " + ",
[","] = ", ",
[", and"] = ", and ",
[", or"] = ", or ",
["by"] = " by ",
["-"] = "–",
["to about"] = " to about ",
["and"] = { off = " and ", on = " and ", exception = true },
["and(-)"] = { input = " and ", output = "–" },
["or"] = { off = " or " , on = " or " , exception = true },
["to"] = { off = " to " , on = " to " , exception = true },
["to(-)"] = { input = " to ", output = "–" },
["+/-"] = { off = " ± ", on = " ± ", adj = " ± ", is_range_change = true },
["by(x)"] = { input = " by ", output = " × ", out_range_x = true },
["x"] = { off = " by ", on = " × ", abbr_range_x = true },
["xx"] = " × ",
["*"] = "×",
["/"] = " / ", -- for a table of high/low temperatures with {{convert|83|/|63|F|disp=br()|abbr=values}}
}
local range_aliases = {
-- ["alternative name for a range"] = "standard range name"
["–"] = "-",
["–"] = "-",
["×"] = "x",
["×"] = "x",
["±"] = "+/-",
["±"] = "+/-",
}
-- Convert accepts range text delimited with whitespace, for example, {{convert|1 to 2|ft}}.
-- In addition, the following "words" are accepted without spaces, for example, {{convert|1-2|ft}}.
-- Words must be in correct order for searching, for example, 'x' after 'xx'.
local range_words = { '-', '–', 'xx', 'x', '*' }
local ranges = {
types = range_types,
aliases = range_aliases,
words = range_words,
}
-- Valid option names.
local en_option_name = {
-- ["local text for option name"] = "en name used in this module"
["$"] = "$",
["abbr"] = "abbr",
["adj"] = "adj",
["comma"] = "comma",
["debug"] = "debug",
["disp"] = "disp",
["frac"] = "frac",
["input"] = "input",
["lang"] = "lang",
["lk"] = "lk",
["order"] = "order",
["qid"] = "qid",
["qual"] = "qual",
["qualifier"] = "qual",
["round"] = "round",
["sigfig"] = "sigfig",
["sing"] = "adj", -- "sing" is an old alias for "adj"
["sortable"] = "sortable",
["sp"] = "sp",
["spell"] = "spell",
["stylein"] = "stylein",
["styleout"] = "styleout",
["tracking"] = "tracking",
}
-- Valid option values.
-- Convention: parms.opt_xxx refers to an option that is set here
-- (not intended to be set by the template which invokes this module).
-- Example: At enwiki, "abbr" includes:
-- ["comma"] = "opt_nocomma"
-- As a result, if the template uses abbr=comma, Module:Convert sets:
-- parms["opt_nocomma"] = true
-- parms["abbr"] = nil
-- Therefore parms.abbr will be nil, or will have one of the listed values
-- that do not start with "opt_".
-- An option value of form "xxx?" is the same as "xxx" but shows the input as deprecated.
local en_option_value = {
-- $=x is handled as a special case: x should be a currency symbol that will be used instead of "$"
["abbr"] = {
-- ["local text for option value"] = "en value used in this module"
["def"] = "", -- ignored (some wrapper templates call convert with "abbr=def" to mean "default abbreviation")
["h"] = "on", -- abbr=on + use "h" for hand unit (default)
["hh"] = "opt_hand_hh", -- abbr=on + use "hh" for hand unit
["in"] = "in", -- use symbol for LHS unit
["none"] = "off", -- old name for "off"
["off"] = "off", -- use name for all units
["on"] = "on", -- use symbol for all units
["out"] = "out", -- use symbol for RHS unit (default)
["unit"] = "unit", -- abbr=on but abbreviate units only: e6km → million km (not ×10⁶ km)
["values"] = "opt_values", -- show only input and output numbers, not units
["~"] = "opt_also_symbol", -- show input unit symbol as well as name
},
["adj"] = {
["mid"] = "opt_adjectival, opt_adj_mid", -- adj=on with user-specified text after input unit (between input and output)
["off"] = "", -- ignored (off is the default)
["on"] = "opt_adjectival", -- unit name is singular and hyphenated
["pre"] = "opt_one_preunit", -- user-specified text before input unit
["ri0"] = "opt_ri=0", -- round input with precision = 0
["ri1"] = "opt_ri=1", -- round input with precision = 1
["ri2"] = "opt_ri=2", -- round input with precision = 2
["ri3"] = "opt_ri=3", -- round input with precision = 3
},
["comma"] = {
["5"] = "opt_comma5", -- only use numsep grouping if 5 or more digits
["gaps"] = "opt_gaps", -- use gaps, not numsep, to separate groups of digits
["gaps3"] = "opt_gaps, opt_gaps3", -- group only in threes rather than default of no gap before a single digit after decimal mark
["off"] = "opt_nocomma", -- no numsep in input or output numbers
},
["debug"] = {
["yes"] = "opt_sortable_debug", -- make the normally hidden sort key visible
},
["disp"] = {
["5"] = "opt_round=5?", -- round output value to nearest 5
["b"] = "b", -- join: '(...)'
["(or)"] = "(or)", -- join: '(...)' with 'or' between outputs in a combination
["br"] = "br", -- join: '<br />'
["br()"] = "br()", -- join: '<br />(...)'
["comma"] = "comma", -- join: ','
["flip"] = "opt_flip", -- reverse order of input/output
["number"] = "opt_output_number_only", -- display output value (not input, and not output symbol/name)
["or"] = "or", -- join: 'or'
["out"] = "opt_output_only",
["output number only"] = "opt_output_number_only",
["output only"] = "opt_output_only",
["preunit"] = "opt_two_preunits", -- user-specified text before input and output units
["sqbr"] = "sqbr", -- join: '[...]'
["table"] = "opt_table", -- output is suitable for a table cell with align="right"
["tablecen"] = "opt_tablecen", -- output is suitable for a table cell with align="center"
["unit"] = "opt_input_unit_only", -- display input symbol/name (not output, and not input value)
["unit or text"] = "opt_input_unit_only, opt_ignore_error", -- display input symbol/name, or given unit code if not known
["unit2"] = "opt_output_unit_only",
["x"] = "x", -- join: <first>...<second> (user-specified text)
},
-- frac=x is handled as a special case: x must be an integer (possibly in local language) = 2 or more
-- input=x is handled as a special case: x should be <value><space><unitcode> or <wikidata-property-id>
["lang"] = { -- language for output digits (both en and local digits are always accepted for input)
["en"] = "opt_lang_en", -- use en digits for numbers, regardless of local language
["local"] = "opt_lang_local", -- use local digits for numbers (default, although config can change default to en)
},
["lk"] = {
["in"] = "in", -- link LHS unit name or symbol
["off"] = "off", -- do not link: same as default except for hand unit
["on"] = "on", -- link all unit names or symbols (but not twice for the same unit)
["out"] = "out", -- link RHS unit name or symbol
},
["order"] = {
["flip"] = "opt_flip", -- reverse order of input/output
["out"] = "opt_order_out", -- do not show input; instead, use order in output combination, with the first output shown as the input
},
-- qid=x is handled as a special case: x should be a Wikidata Q item identifier.
-- qual=x is handled as a special case: x should be a Wikidata Q item identifier.
["round"] = {
["0.5"] = "opt_round=0.5", -- round output value to nearest 0.5
["5"] = "opt_round=5", -- round output value to nearest 5
["10"] = "opt_round=10", -- round output value to nearest 10 (same as but clearer than "|-1")
["25"] = "opt_round=25", -- round output value to nearest 25
["50"] = "opt_round=50", -- round output value to nearest 50
["each"] = "opt_round_each", -- using default precision in a range, round each output separately (default uses highest precision of each item in range)
},
-- sigfig=x is handled as a special case: x must be an integer (possibly in local language) = 1 or more
["sortable"] = {
["off"] = "", -- ignored (off is the default)
["on"] = "opt_sortable_on", -- output sort key for use in a sortable table, based on value from converting to a standard base unit
},
["sp"] = {
["us"] = "opt_sp_us", -- use U.S. spelling (like "meter" instead of default "metre")
},
["spell"] = { -- only English spelling is supported; not scientific notation; only some fractions
["in"] = "opt_spell_in", -- spell input value in words
["In"] = "opt_spell_in, opt_spell_upper", -- spell input value in words with first letter uppercase
["on"] = "opt_spell_in, opt_spell_out", -- spell input and output values in words
["On"] = "opt_spell_in, opt_spell_out, opt_spell_upper", -- same, with first letter of first word in result uppercase
},
-- stylein=x is handled as a special case: x can be any text
-- styleout=x is handled as a special case: x can be any text
-- tracking=x is handled as a special case: x can be any text
}
return {
SIprefixes = SIprefixes,
all_categories = all_categories,
all_messages = all_messages,
currency = { ['$'] = true, ['£'] = true, ['€'] = true, ['₱'] = true, ['₽'] = true, ['¥'] = true },
customary_units = customary_units,
disp_joins = disp_joins,
en_option_name = en_option_name,
en_option_value = en_option_value,
eng_scales = eng_scales,
ranges = ranges,
}